Green Inova's LED searchelight reached up to IP68 waterproof rating, all marine grade materials and fixings ensures long life span, and it's suitable for for harsh environments.
Using only high-quality materials, it creates the best performing marine LED searchlight in the market.
A perfect solution for all types of seagoing vessels, such as tugs, pilot vessels, high speed vessels etc.
WHAT'S THE DIFFERENCE BETWEEN IP65, IP66, IP67 AND IP68
IP65
A fixture with an IP rating of 65 is protected against multi-directional, low-pressure water jets. In order to pass testing and achieve an IP65 rating, fixtures must be able to withstand water projected by a 0.25-inch nozzle. To achieve satisfactory results, this test must be run for a minimum of fifteen minutes, with the water source placed three yards from the fixture. Additionally, the water pressure must be 30 kPa with water volume of 3.3 gallons per minute.
IP66
An IP66 rated fixture is protected against multi-directional, high-pressure water jets. To pass IP66 testing, the fixture must be able to withstand water projected from 0.50-inch nozzle, multi-directional, high-pressure jets.This test must be run for a minimum of three minutes, at a distance of three yards, with a water volume of 26.4 gallons per minute and a pressure of 100 kPa.
IP67
A fixture rated at IP67 is protected from water immersion between 5.9 inches and 39.37 inches. To pass IP67 testing, the fixture must not permit ingress of harmful quantities of water when fully immersed. There must be at least 5.9 inches of water above the fixture for the test to be valid.
IP68
An IP68 fixture is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the fixture is hermetically sealed or that any water that does get inside will cause no damage.
Post time: Mar-12-2021